Konica Minolta bizhub C658 Service Manual page 1930

bizhub C658/C558/C458/C368/C308/C258
21. COUNTER CONTROL
21.1 Configuration
[1]
[2]
[1] MFP board (mechanical control area) (MFPB)
[3] Electronic counter
21.2 Operation
Name
Electronic counter
Key counter (option)
NOTE
▪ The counting modes can be selected at [Billing Setting] of Service Mode. For details, see "
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 21.
[4]
[3]
[2] MFP board (controller area) (MFPB)
[4] Key counter (option)
Function/system
• Number of total in copy/print/fax/scan mode will be displayed on
the screen as described below.
• Black, full color, mono color, and 2 color
• Total counter, large size counter, color total (copy + printer), scan
counter, fax TX counter, fax RX counter, No. of originals counter,
No. of prints counter, total duplex counter
• Counts one when an exit signal is applied to it
• When charging prints by using the key counter, copies cannot be
made without the key counter. However PC prints and fax TX/RX
service are available without the key counter.
• Displays the cumulative number of copies while the key counter is
being mounted.
• A mechanical counter driven by an electric signal
• Counts one when a paper feed start signal or image forming start
signal, whichever occurs earlier, is applied to it
O-155
COUNTER CONTROL
I.8.3.1 Counter Setting".