Konica Minolta bizhub C658 Service Manual page 1832

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[1] Toner collecting screw
7.3.7 Cleaning blade foreign matter removal control
• The transfer belt is rotated backward to a small extent and then rotated forward to remove foreign matter (dust, toner, etc.) wedged
between the transfer belt and the edge of the cleaning blade.
(1) Operation timing
• The backward rotation control is provided at the completion of every print job.
[1]
[2]
[5]
[6]
[1] Toner collecting screw
[3] Transfer belt
[5] Forward rotation
7.3.8 Transfer belt new article detection
• The transfer belt unit is not provided with any new article detection mechanism. If the transfer belt is replaced with a new one, therefore,
"New Release" must be performed in [Counter] -> [Life] of the Service Mode. For detailed operating procedures, see "
NOTE
▪ For the life of the toner cartridge, refer to
Consumable/part replacement time (bizhub
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 7. 1ST
[3]
[4]
F.6.1 Consumable/part replacement time (bizhub C368/C308/C258)
C658/C558/C458).
[2] Shutter (open)
[2] Backward rotation
[4] Transfer belt driven roller
[6] Cleaning blade
O-57
TRANSFER SECTION
I.5.17.2 Life".
and F.6.2