Konica Minolta bizhub C658 Service Manual page 1872

bizhub C658/C558/C458/C368/C308/C258
(1) Right door locking mechanism
• The right door is provided with a locking mechanism.
(a) Unlocking the right door
• With drawing the lever of the right door to the front will disengage the door lock pawls (three) equipped at the front side of the right
door.
(b) Locking the right door
• Close the regist unit and then close the right door. When the right door is closed in its correct position, the door lock pawls (three)
equipped at the front side of the right door lock the right door in place.
[4]
[1] Door lock pawl (upper)
[3] Door lock pawl (lower)
(2) Regist unit lock mechanism
1. When the right door is opened, the regist unit that is left locked to the right door is also opened.
• The regist unit can be separated from the right door when the regist unit lever is disengaged from the door lock pawl equipped on the
right door side.
[1] Door lock pawl
(3) Right door open/close detection mechanism
• The right door switch detects that the right door is opened or closed.
• When the right door is closed, the open/close detection plate equipped at an upper portion at the front of the right door presses the
actuator of the right door switch. This turns ON the right door switch and the machine determines that the right door is closed.
• When the right door is opened, the actuator of the right door switch is released. This turns OFF the right door switch and the machine
determines that the right door is opened, giving a message that prompts the operator to close the right door.
• On determining that the right door is open, the machine prohibits the use of all jobs but the fax reception job. A paper misfeed results if
the right door is opened during a print cycle.
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 12.
[1]
[2]
[3]
[2]
[4]
[1]
[2]
[2] Lever
O-97
REGISTRATION SECTION
Right door lever
Door lock pawl (center)