Reference For System Console Openboot Configuration Variable Settings" On - Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual

The system stores the parameter changes, and boots automatically when the
OpenBoot configuration variable auto-boot? is set to true (its default value).
Note – To store parameter changes, you can also power cycle the system using the
front panel Power button.
What Next
You can issue system commands and view system messages using your local
graphics monitor. Continue with your installation or diagnostic procedure, as
needed.
If you want to redirect the system console back to the serial management and
network management ports, see:

"Reference for System Console OpenBoot Configuration Variable Settings" on

page 196
Reference for System Console OpenBoot
Configuration Variable Settings
The Sun Fire V440 system console is directed to the serial management and network
management ports (SERIAL MGT and NET MGT) by default. However, you can
redirect the system console to the serial DB-9 port (ttyb), or to a local graphics
monitor, keyboard, and mouse. You can also redirect the system console back to the
serial management and network management ports.
196 Sun Fire V440 Server Diagnostics and Troubleshooting Guide • July 2003