Figure 2-3 Openboot Diagnostics Interactive Test Menu - Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual

1 flashprom@2,0
4 network@1
7 rtc@0,70
10 serial@0,2e8
13 usb@b
Commands: test test-all except help what setenv set-default exit
OpenBoot Diagnostics Interactive Test Menu
FIGURE 2-3
Interactive OpenBoot Diagnostics Commands
You run individual OpenBoot Diagnostics tests from the obdiag> prompt by typing:
obdiag> test n
where n represents the number associated with a particular menu item.
Note – You cannot reliably run OpenBoot Diagnostics commands following an
operating system halt, since the halt leaves system memory in an unpredictable
state. Best practice is to reset the system before running these commands.
There are several other commands available to you from the obdiag> prompt. For
descriptions of these commands, see
Diagnostics Test Descriptions" on page 47.
You can obtain a summary of this same information by typing help at the obdiag>
prompt.
18 Sun Fire V440 Server Diagnostics and Troubleshooting Guide • July 2003
o b d i a g
2 i2c@0,320
5 network@2
8 scsi@2
11 serial@0,3f8
diag-passes=1 diag-level=min test-args=
3 ide@d
6 rmc-comm@0,3e8
9 scsi@2,1
12 usb@a
in "Reference for OpenBoot
TABLE 2-13