Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual page 87

6. When you are done running OpenBoot Diagnostics tests, exit the test menu. Type:
obdiag> exit
The ok prompt reappears.
7. Set the auto-boot? OpenBoot configuration variable back to true
ok setenv auto-boot? true
This allows the operating system to resume starting up automatically after future
system resets or power cycles.
8. To reboot the system, type:
ok reset-all
The system stores the OpenBoot configuration variable settings and boots
automatically when the auto-boot? variable is set to true.
What Next
Try replacing the FRU or FRUs indicated by OpenBoot Diagnostics error messages,
if any. For FRU replacement instructions, see:
Sun Fire V440 Server Parts Installation and Removal Guide
.
Type:
Chapter 3 Isolating Failed Parts 69