How To Access The System Console Via Tip Connection - Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual

d. Power on the system.
See the Sun Fire V440 Server Administration Guide for power-on procedures.
What Next
Continue with your installation or diagnostic test session as appropriate. When you
are finished, end your session by typing the terminal server's escape sequence and
exit the window.
For more information about connecting to and using the ALOM system controller,
see:
Sun Advanced Lights Out Manager (ALOM) Online Help
If you have redirected the system console to ttyb and want to change the console
settings back to use the serial and network management ports, see the following:
"Reference for System Console OpenBoot Configuration Variable Settings" on
page 196
How to Access the System Console via
tip Connection
Before You Begin
This procedure assumes that you are accessing the Sun Fire V440 server system
console by connecting the serial port of another Sun system to the serial
management port (SERIAL MGT) of the Sun Fire V440 server.
What to Do
1. Connect the RJ-45 serial cable and the RJ-45 or DB-25 adapter provided.
The cable and adapter connect between another Sun system's serial port and the
serial management port on the back panel of the Sun Fire V440 server. Pinouts, part
numbers, and other details about the serial cable and adapter are provided in the
Sun Fire V440 Server Parts Installation and Removal Guide. See
184 Sun Fire V440 Server Diagnostics and Troubleshooting Guide • July 2003
.
FIGURE A-5