Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual page 40

The following is sample output from the probe-scsi command.
probe-scsi Command Output
CODE EXAMPLE 2-3
ok probe-scsi
Target 0
Unit 0 Disk
Target 1
Unit 0 Disk
The following is sample output from the probe-scsi-all command.
probe-scsi-all Command Output
CODE EXAMPLE 2-4
ok probe-scsi-all
/pci@1f,700000/scsi@2,1
/pci@1f,700000/scsi@2
Target 0
Unit 0 Disk
Target 1
Unit 0 Disk
probe-ide Command
The probe-ide command communicates with all Integrated Drive Electronics (IDE)
devices connected to the IDE bus. This is the internal system bus for media devices
such as the DVD-ROM drive.
Caution – If you used the halt command or the L1-A (Stop-A) key sequence to
reach the ok prompt, then issuing the probe-ide command can hang the system.
The following is sample output from the probe-ide command.
CODE EXAMPLE 2-5
ok probe-ide
Device 0
Device 1
22 Sun Fire V440 Server Diagnostics and Troubleshooting Guide • July 2003
FUJITSU MAN3367M SUN36G 1502
FUJITSU MAN3367M SUN36G 1502
FUJITSU MAN3367M SUN36G 1502
FUJITSU MAN3367M SUN36G 1502
probe-ide Command Output
( Primary Master )
Removable ATAPI Model: TOSHIBA DVD-ROM SD-C2512
( Primary Slave )
Not Present
71132959 Blocks, 34732 MB
71132959 Blocks, 34732 MB
71132959 Blocks, 34732 MB
71132959 Blocks, 34732 MB