Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual page 74

What to Do
1. Determine the current state of the Locator LED.
Do one of the following:
From the system console, type
# /usr/sbin/locator
The 'system' locator is on
From the ALOM system controller, type:
sc> showlocator
Locator LED is ON
2. Turn the Locator LED on.
Do one of the following:
From the system console, type
# /usr/sbin/locator -n
From the ALOM system controller, type:
sc> setlocator on
3. Turn the Locator LED off.
Do one of the following:
From the system console, type:
# /usr/sbin/locator -f
From the system controller, type:
sc> setlocator off
56 Sun Fire V440 Server Diagnostics and Troubleshooting Guide • July 2003
:
: