Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual page 42

Error and System Message Log Files
Error and other system messages are saved in the file /var/adm/messages.
Messages are logged to this file from many sources, including the operating system,
the environmental control subsystem, and various software applications.
In the case of Solaris operating environment software, the syslogd daemon and its
configuration file (/etc/syslogd.conf) control how error messages are handled.
For information about /var/adm/messages and other sources of system
information, refer to "How to Customize System Message Logging" in the System
Administration Guide: Advanced Administration, which is part of the Solaris System
Administration Collection.
Solaris System Information Commands
Some Solaris commands display data that you can use when assessing the condition
of a Sun Fire V440 server. These commands include the following:
prtconf command
prtdiag command
prtfru command
psrinfo command
showrev command
The following sections describe the information these commands give you. For
instructions on using these commands, turn to "How to Use Solaris System
Information Commands" on page 93, or look up the appropriate man page.
prtconf Command
The prtconf command displays the Solaris device tree. This tree includes all the
devices probed by OpenBoot firmware, as well as additional devices, like individual
disks, that only the operating environment software "knows" about. The output of
prtconf also includes the total amount of system memory.
an excerpt of prtconf output (edited for brevity).
24 Sun Fire V440 Server Diagnostics and Troubleshooting Guide • July 2003
shows
CODE EXAMPLE 2-7