Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual page 119

What to Do
1. Check for the presence of SunVTS packages. Type:
% pkginfo -l SUNWvts SUNWvtsx SUNWvtsmn
If SunVTS software is loaded, information about the packages is displayed.
If SunVTS software is not loaded, you see an error message for each missing
package.
ERROR: information for "SUNWvts" was not found
ERROR: information for "SUNWvtsx" was not found
...
The pertinent packages are as follows.
Package
SUNWvts
SUNWvtsx
SUNWvtsmn
2. (Solaris 8 only) Check for additional needed software.
This applies only if you intend to install and run SunVTS 5.1 software (or later
compatible versions) under the Solaris 8 operating environment.
SunVTS 5.1 software requires additional packages that may not be installed with
Solaris 8 software. To find out, type the following:
% pkginfo -l SUNWlxml SUNWlxmlx SUNWzlib SUNWzlibx
This tests for the presence of the following packages.
Package
SUNXlxml
SUNWlxmlx
SUNWzlib
SUNWzlibx
Description
SunVTS kernel, user interface, and 32-bit binary tests
SunVTS 64-bit binary tests and kernel
SunVTS man pages
Description
XML library (32-bit)
XML library (64-bit)
Zip compression library (32-bit)
Zip compression library (64-bit)
Notes
Required by SunVTS 5.1
Needed by XML libraries
Chapter 5 Exercising the System 101