Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual page 115

What to Do
1. Log in as superuser to a system with a graphics display.
The display system should be one with a frame buffer and monitor capable of
displaying bitmapped graphics such as those produced by the SunVTS GUI.
2. Enable remote display. On the display system, type:
# /usr/openwin/bin/xhost + test-system
where test-system is the name of the Sun Fire V440 server being tested.
3. Remotely log in to the Sun Fire V440 server as superuser.
Use a command such as rlogin or telnet.
4. Start SunVTS software. Type:
# /opt/SUNWvts/bin/sunvts -display display-system:0
where display-system is the name of the machine through which you are remotely
logged in to the Sun Fire V440 server.
If you have installed SunVTS software in a location other than the default /opt
directory, alter the path in the above command accordingly.
Chapter 5 Exercising the System 97