Sun Microsystems Sun Fire V440 Diagnostics And Troubleshooting Manual page 163

consolehistory run -v Command Output (Continued)
CODE EXAMPLE 7-20
Initializing 1024MB of memory at addr
Initializing 1024MB of memory at addr
Rebooting with command: boot disk
Boot device: /pci@1f,700000/scsi@2/disk@0,0
\
SunOS Release 5.8 Version Generic_114696-04 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.
Hardware watchdog enabled
Indicator SYS_FRONT.ACT is now ON
configuring IPv4 interfaces: ce0.
Hostname: Sun-SFV440-a
The system is coming up.
NIS domainname is Ecd.East.Sun.COM
Starting IPv4 router discovery.
starting rpc services: rpcbind keyserv ypbind done.
Setting netmask of lo0 to 255.0.0.0
Setting netmask of ce0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway Sun-
SFV440-a
syslog service starting.
Print services started.
volume management starting.
The system is ready.
Sun-SFV440-a console login: May
keyswitch change event - state = UNKNOWN
May 9 14:52:57 Sun-SFV440-a rmclomv: Keyswitch Position has changed to Unknown
state.
May 9 14:52:58 Sun-SFV440-a rmclomv: NOTICE: keyswitch change event - state =
LOCKED
May 9 14:52:58 Sun-SFV440-a rmclomv: KeySwitch Position has changed to Locked
State.
May 9 14:53:00 Sun-SFV440-a rmclomv: NOTICE: keyswitch change event - state =
NORMAL
May 9 14:53:01 Sun-SFV440-a rmclomv: KeySwitch Position has changed to On State.
sc>
Please wait.
9 14:52:57 Sun-SFV440-a rmclomv: NOTICE:
Chapter 7 Troubleshooting Hardware Problems
200000000 -
0 -
File and args:
All rights reserved.
145