Table of Contents
Advertisement
Saia-Burgess Controls AG
6.8
Special internal Functions
An internal serial Flash is always equipped. Its capacity is defined at 4 MBytes.
Goal of this added memory?
When you use slow communication speed, the transfer of data takes time from the
PLC to the MB-Panel. A possibility consist of loading locally the project files *.teq and
*.gif, created for the Web-Server in PLC, using this internal 4 MBytes memory flash.
How to access the files locally in the internal memory?
Different art to access these files can be defined in the Setup Menu Configuration/
Advanced. The button "Change" can be switched to
remote».
How to store the project files in this memory?
Making an FTP connection, the internal memory system will show you a sub-directory
called M1_Flash.
- If you want to store your common files that should be the same on every PLC on
the network, then store them under subdirectory M1_Flash/WEBPAGES.
-
If you want to store your files dedicated
the network, then store them like that:
--> for a «Http connection» under subdirectory M1_Flash/WEBPAGES/
TCPIPAddress where
192_168_12_92.
--> for «SBUS» or «ETHER-SBUS connection» under subdirectory M1_Flash/
WEBPAGES/SBUSorETHER-SBUS_Name where
Name»
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
«TCPIPAddress»
is the Station Name defined in the Setup connection settings.
«Local file search before or after
that for an access from only one PLC on
is written as this example:
«SBUSorETHER-SBUS_
Update & special settings
Special internal Functions
6
6-25
Advertisement
Table of Contents
