Table of Contents
Advertisement
Saia-Burgess Controls AG
6.7.5
Function KEYS Access
When you have Function Keys on your Panel (Comfort line version), you can define
which action you want to give to your F-Keys
HOW to program these in the Web-Editor Project?
A. Open a *.teq page
As normally this F-Keys should be reached every time, like the Help or the Back
Home functions, it makes sense to place these F-Keys in the file «background.teq»
that is always active. The name can be changed, but it has to be selected after in the
Project Configuration settings.
B. Where to position the F-Key button?
If you don't want to see the F-Key buttons, go in the «background.teq», go in teq view
configuration and enlarge the pixel size. The buttons corresponding to the F-Keys can
be placed into the enlarged area. In this case, they are invisible on the screen panel.
(Example with MB-Panels: standard size is 320×240 , enlarged size is 320×280). It
won't cause an error, it will just display your design on 320×240 pixels.
C. Button Selection
Place a button in the *.teq view and
open the Function keys Tab.
D. Define Action
Double-click on the Button in your *.teq file and select the sub-menu Function Keys:
Use the syntax: FKEY_# where # is the F-Key number and also ESC (see
Chapter 1.6.3). Be careful: «case sensitive».
Now your F-Key button has a defined action.
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
Update & special settings
Special internal Functions
6
6-24
Advertisement
Table of Contents
