S-Bus - Baudrate And Controls; Printer Port Tcp To Rs-232 (Tcp2Rs-232) - Baudrate And Controls (Only With Qvga-Panels); Ps/2 Port; Usb Port (Client) - SBC PCD7.D4 Series Manual

Saia-Burgess Controls AG
3.3 S-Bus – Baudrate and Controls
Here the user must defined himself the communication speed he wants to setup. For
this, you must adjust the Baudrate in the Setup Menu/Configuration/Communication
Port #0 or 1 - Configure :
Possible Baudrate :
Please ask our support to help you set-up the more efficient communication speed
in your network configuration. It can be sometimes useful to reduce the baudrate in
order to save the PLC ressources for other applications.
Other parameter cab also be set like TN Delay, TS Delay,Timeout or Retries.
3.4 Printer port TCP to RS-232 (TCP2RS-232) – Baudrate and Controls
(only with QVGA-Panels)
Here also the user must define by himself the communication speed he wants to
setup. Added to that the frame format must be defined : Parity bit, Data bits, Stop bit,
Handshake should correspond to the printer communication.
A connection timeout can also be set-up.
Important parameter to be defined is the TCP/IP port you will use to transfer Infor-
mation transparently from the TCP/IP port to our RS-232.
Demo program can be asked on request.
3.5

PS/2 port

No special settings to do, a part from the keyboad language.
3.6

USB port (client)

Fully USB port compatible with USB 1.1 specifications.
Full Speed: 12 Mbits.
No adjusment is necessary.
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
S-Bus | Printer port TCP to RS232 | PS/2 port | USB port
1200, 2400, 4800, 9600, 19'200, 38'400, 57'600, 115'200 bps
Communication mode settings
3
3-2