Internal Special Functions; Gesture Recognition - SBC D443WTPR Manual

Saia-Burgess Controls AG
It is recommended that you use text fields which exceed the size shown in the editor by up to 20%.
To determine the text field length, you can use the table for min. and max. x sizes below.
General recommendations for the Y size in relation to the font size and format
Basic rule: the text should lie WITHIN the contours.
For buttons and editing fields, a 2 pixel shadow is added (on the inside for button contours and on
the outside for editing fields).
If the text is too big for the editing field, it will overlap the edge and the 3D shadowing.
You should make allowances for the following edges:

Simple text fields and those with several lines: 2 x edge width + 1

Buttons: 2 x edge width + 5

Editing fields: 2 x edge width + 5
Fontgröße
Arial 36
Arial 24
Arial 20
Arial 16
Arial 12
Arial 10
Arial Bold 36
Arial Bold 24
Arial Bold 20
Arial Bold 14
CourierNew 20
CourierNew 16
CourierNew 12
CourierNew 10
CourierNew Bold 20
CourierNew Bold 14
Tahoma 24
Tahoma 20
Tahoma 16
Tahoma 12
Tahoma 10
Tahoma Bold 24
Tahoma Bold 20
Tahoma Bold 14

Internal special functions

The internal sensor values are made available to the web application. For this purpose, INT varia-
bles reserved by the system are updated cyclically by the firmware with the current value and made
available to the web application.
7.5.1

Gesture recognition

The panel allows the recognition of user gestures on the touchscreen.
The information is made available in internal variables.
The following gestures can be recognised:
Swiping, final speed when swiping, tapping, pressing, duration of the press
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
yGröße min xGröße max xGröße
41 7 36
28 7 24
23 6 20
19 3 16
15 3 12
12 3 10
41 9 35
28 7 23
23 6 20
16 4 15
23 12 12
19 10 10
14 7 7
12 6 6
23 12 12
17 8 8
29 5 24
25 4 20
20 4 16
15 4 12
13 3 10
29 7 29
25 6 24
17 4 17
35