SBC PCD7.D4 Series Manual page 92

Saia-Burgess Controls AG
Config Container
file (Source HN
entry 10.03.10)
R/W uBT_EnableCache Boolean
R/W uBT_EnableSIP
R/W uBT_FirstPad-
Name
no uBT_FlashStatus
R/W uBT_FocusBorder-
Width
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
Type Default
1
value (enabled)
string
Boolean 1
value (enabled)
string
Decimal alphapad.teq
enumer-
ated value
string
Decimal 0
value
string
Decimal 2
value
string
Min Max Description
Value Value
Min Max
Length Length
0 1 File cache use (1), 0 no file cache
for all non-image visualization files.
Files first are cached the moment
they are used.
The cache is the place where files
are searched first, independent of
local file use settings.
The cache is cleared at start-up
and at URL jumps.
Image files are decompressed and
cached in a separate video cache
that is always active.
This video cache is cleared at
start-up and URL jumps and at too
much data loaded, in which case
all required files are reloaded and
decompressed again.
0 1 Read/Write SIP à Select Soft Input
Panel (keyboard on the screen)
Write 0 à SIP is disabled. Virtual
keyboards are disabled.
Write 1 à SIP is enabled. Virtual
keyboards (alphapad.teq and key-
pad.teq) are enabled.
1 24 File name entry for an alternative
virtual keyboard file as replacement
for alphapad.teq at local file use.
At local file use alphapad.teq from
the setup menu (from INTFLASH/
WEB) is used by default.
The alternative file–that must be
named otherwise than alphapad.
teq–can be placed in M1 or SD
flash over FTP, or included in the
stored web project in the remote
server.
The maximum number of char-
acters (file extension with dot
included) is 24.
0 255 M1 Flash
status20: Device present,no file
21: Device present,file system OK
22: Device present, error at file
system creation
23: Device present, busy creating
file system
24: Device present, busy with flash
sector based compression
-1: Unknown error
0 5 On the Edit and Button Painter vis-
ualization a rectangle focus frame
is drawn to indicate it's activation.
This setting is used for the object
focus frame line width (pixel): 1-5
0 switches the focus off.
Update & special settings
Special internal Functions
system
6
6-20