SBC PCD7.D4 Series Manual page 94

Saia-Burgess Controls AG
Config Container
file (Source HN
entry 10.03.10)
R/W uBT_Local-
FileSearch
no uBT_MACAddr
no uBT_MultiKey-
Value
R/W uBT_SbusAddr
R/W uBT_ ScaleMode
R/W uBT_SecondsToIn-
activity
Read uBT_SerialNumber ANSI text
only
no uBT_Setup
R/W uBT_SubNetMask IP address
Read uBT_Version
only
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
Type Default
Decimal Local before
enumer- remote (1)
ated value
string
ANSI text
string
ANSI text 0
string
Decimal 10
value
string
Decimal Auto (0)
enumer-
ated value
string
ANSI text 0
string
string
Boolean 0
value
string
0xFF FF FF 00 *
string
ANSI text Current version
string string
Min Max Description
Value Value
Min Max
Length Length
0 2 Select local filesearch mode
0: no local file use
1: use local files before remote
2: use remote files before local
The local search order is fixed, in
order of use:
- Video cache (image only)
- File cache (if enabled)
- Internal Flash
- M1_Flash
- SD Card Flash if used
0 20 Own MAC address
(read only)
0 1 The container is not active
External SIP Keyboard multi key
indication (1).
At 0 no actual multi key active
0 253 Own Sbus address
0 2 Upscale mode setting
Auto (0): Smaller views are auto-
matically adjusted to the terminal
screen size on a view by view
base.
QVGA views are expanded to
full screen use on VGA terminals
(horizontal and vertical two fold
expansion with pixel doubling).
VGA (1): Forced setting to VGA
without up-scaling of smaller views.
This switches the up-scaling off on
VGA terminals.
QVGA (2): Forced up-scaling with
pixel doubling on VGA terminals.
The setting gets effective at the
next view jump or URL jump, or
after restart.
0 5 The container is not active
Touch / Keyboard inactivity supervi-
sory time (Sec)
This can be used for a switch to
a less frequent touch / keyboard
entry polling mode.
0 12 Serial Number
(read only)
0 1 The container is not active.
A setting to 1 cause the terminal
to pop up and jump in the setup
menu.
* Read/Write subnet mask of the
subnet that is used by the
terminal. *
Modification forces a restart.
FTP connections are lost.
0 32 Firmware version
Read only string
Update & special settings
Special internal Functions
6
6-22