Communication - SBC PCD7.D4 Series Manual

Saia-Burgess Controls AG
4.2.3

Communication

1 Port #0
(RS-232)
2 Configure
3 Port #1
(RS-485)
4 Configure
5 Configure
6 Configure
7

Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
Default: Port #0 (D-sub 9)
SBUS
- None: no S-Bus communication
- SBUS: Communication Serial S-Bus RS-
232
- TCP2RS232 :TCP/IP to RS-232.
Using MB-Panel as gateway ( for example
for Printer output)
Port #0 - S-Bus configuration on Port #0
- Configuration of TCP2RS232 on Port 0
(TCP2RS232 means TCP to RS-232)
Default: Port 1 (orange spring connector no.1,2,3)
none
- None: no S-Bus communication
- SBUS: serial S-Bus RS-485 communication
Port #1 S-Bus configuration on Port #1
Port Ether- Ethernet S-Bus options
net
S-Bus Configuration of up to 16 serial or Ethernet
connections S-Bus stations .
Back to configuration menu
Setup Menu QVGA MB-Panels
Setup Menu Configuration "step by step"
4
4-13