Table of Contents
Advertisement
Saia-Burgess Controls AG
6.7.3
uBT_BackLight container diagram
6.7.4
Additional uBTerminal containers for «Haptic» panel
Container variables, available to the user, are included in the firmware of these termi-
nals. Containers let the application program exchange information with the firmware.
All container variables have the prefix «uBT_». Caution: case sensitive!
Container names
uBT_HapticOn
uBT_HapticEnable
uBT_HapticMouseDownEffect yes
uBT_HapticMouseUpEffect
uBT_HapticRepeatEffect
uBT_HapticRepeatPeriod
Important points:
When programming the haptic effects, there are two important points which you
should be aware of:
1. The above Container variables above apply to ALL BUTTON objects,
2. The Container variables are evaluated at the time the haptic effect plays.
These two points means that the Web Project programmer has to take care of the
state of the variables. In order to simplify the programming, we suggest the following
programming method.
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
FTP
Range
Default Description
access
yes
-
1
no
0 or 1
1
0 to 27
1
yes
0 to 27
1
no
0 to 27
1
no
10 to
300ms
3000ms
Update & special settings
Special internal Functions
Careful: Never change (in all case) the
default value (1) of this container.
If set to 1, haptic effects are enabled. If
set to 0, haptic effects are disabled. Can
be changed dynamically from the Web
Project.
Defines the effect that is played when the
user presses a BUTTON object.
Defines the effect that is played when the
user releases a BUTTON object.
Defines the effect that is played when
the user presses and holds a BUTTON
object.
The effect is repeated according to the
«uBT_HapticRepeatPeriod». Stops when
the user releases the BUTTON object.
Defines the time between each «uBT_
HapticRepeatEffect». All values are in
millisecond.
6
6-23
Advertisement
Table of Contents
