Special (Advanced Function) - SBC PCD7.D4 Series Manual

Saia-Burgess Controls AG
4.1.5

Special (advanced function)

1 Setup timeout (s)
2 Format
internal flash
(Advanced function)
3 Format
M1 flash
(Advanced function)
4

Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
Default: 10 seconds The title page is displayed for this amount of time.
Minimum: 3 sec- If set at «0», the title page will not be called.
onds
Default status Advanced function with message of confirmation:
«Do you really want to reformat the internal flash
21 (green)  De-
completely? All configuration data will be reset and
vice OK ; Filesyst
the MB-Panel will reboot afterwards!»
OK.
Status 21 (green): Device OK; Filesyst OK
Status 22 (red): Device OK; Filesyst ERROR *
Status 23 (yellow): Device OK; Filesyst under
Construction
Status 24 (yellow): Device OK; Filesyst under
Compression.
* reformat once again.
Formatting duration: ~ 15 sec.
Default status Advanced function with message of confirmation:
21 (green)  De- «Do you really want to reformat the M1 flash
vice OK ; Filesyst completely?»
OK.
Status 21 (green): Device OK; Filesyst OK
Status 22 (red): Device OK; Filesyst ERROR *
Status 23 (yellow): Device OK; Filesyst under
Construction
Status 24 (yellow): Device OK; Filesyst under
Compression.
* reformat once again
Formatting duration: ~ 2 minutes.
xxxxxxxxxx Back to the System
Setup Menu QVGA MB-Panels
Setup Menu Parameters «Step by Step»
4
4-5