Saia-Burgess Controls AG
2.5
Interface connection
2.5.1
Ethernet port RJ-45, X2
Connection between terminal PCD7.D4xx and PCD1.M135, PCD2.M150,
PCD2.M170 and PCD2.M480 can be made.
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
You can use a Standard or CAT5 «crossed» Ethernet cable
equally when using the X2 Port in http direct or Ether-S-Bus.
To multiple the network connections, please use Fast Ethernet
Switch 10/100 Mbps resp. through a Router.
Hardware-System Overview
Interface connection
2
2-5