Saia-Burgess Controls AG
Now, if your SBC PLC is also well set up, you should be able to get a
beside your connection settings. This means you are connected to the SBC PLC,
but you still have to type the right
(as shown in the Menu SBus connection settings, ex. ET-SBUS10/start.html) and
the
Address of the start page
Now your MB-Panel should be connected to the Saia PCD and the start page select-
ed should be displayed on the screen. You can now navigate in your Web-pages !
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
Name of Start Page
127.0.0.1 (dedicated to MB-Panel in S-Bus Mode).
Communication
check mark
in the Menu Configuration
Quickstart
1
1-10