Table of Contents
Advertisement
Saia-Burgess Controls AG
4.2.2
Special
1
File cache
2
Local & remote
server
3
Time to inactiv-
ity (sec)
4
Polltime during
inactivity (ms)
5/6 Buzzer Volume
& Frequency
7
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
Default: Ena-
The file cache can be enabled/disabled.
bled
Disabling is only useful for projects in develop-
In normal op-
ment, in order to see the visible change in files
eration, the file
cached.
cache should
always be ena-
bled.
Default:
«No local file search» means that no files
«no local file
(.teq or .gif) will be searched in the local
search»
server (= uBrowser server).
«Local file search before remote» means that
files (.teq or .gif) will be searched in the local
server before searching in the PLC server.
«Local file search after remote» means that
files (.teq or .gif) will be searched in the
remote server before searching in the local
server (MB-Panel)
With additional SD-card, files will be searched
first in M1_FLASH (embedded 4MB flash),
then in SLOFLASH (SD-card flash).
Default: 0 sec
Time parameters.
Especially useful for MB-Panels in Network
application.
Default: 0 ms
After a period of inactivity (parameter 3) of the
panel, the numbers of request can be reduced
from the refresh time value (project configuration
parameter) to the polling time (parameter 4).
Default: Vol = 0
- Volume: Duty cycle adjustment between
0 to 20 ( 0 = silence)
- Frequency: Adjustment possible between:
Freq. = 125 Hz
125 to 8000.
Back to config.
menu
Setup Menu QVGA MB-Panels
Setup Menu Configuration "step by step"
4
4-11
Advertisement
Table of Contents
