SBC PCD7.D4 Series Manual page 14

Saia-Burgess Controls AG
 Click on the
nection buttons and press ENTER.
 You can now adjust the
and Station Nr you want to access to. Be sure you saved your definition.
Now, if your SBC PLC is also well set up, you should be able to get a check mark

beside your connection settings. This means you are connected to the Saia PCD,
but you still have to type the right
(as shown in the Menu SBus connection settings, ex. SBUS-RS-485/start.html)
and the Address
Mode).
Now your MB-Panel should be connected to the Saia PCD and the start page select-
ed should be displayed on the screen. You can now navigate in your Web-pages !
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
SBus connection Configure
SBus connection
Name of Start Page
of the start page 127.0.0.1 (dedicated to MB-Panel in S-Bus
button. Then select one of the 16 con-
settings and define the name, type
in the Menu Configuration
Quickstart
Communication
1
1-8