Saia-Burgess Controls AG
Note:
If on the same view the macro «wr_PPO2CO-on_Repaint» is used the preceding
button use will be (near) ineffective as at each repaint the PPO value will be taken
and override it again.
Example with in this case Register «PalarmInterval»
(Symbol to be defined in the Saia PG5 symbol editor as global)
(Remark also: Use Search / Update in this screen to define it and the PPO Initializa-
tion button to define the type as DEC):
Manual PCD7.D4xx │ D ocument 26-851 ENG12 │ 2 016-02-05
Appendix B
Introduction
B
B-3