Table of Contents
Advertisement
TRANSPORT, INSTALLATION, COmmISSIONING
Preparations
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
DIM063EN - 2021-09-27
Power supply
The bar loading magazine is connected with the machine and is powered by the
machine.
For details concerning this, please refer to the respective electric wiring diagram.
Compressed Air Supply
Be aware of the max. permissible pressure for the magazine. See
pneumatic diagram "Air supply of the loading magazine" in the
chapter "Working Data".
For operating pressure and capacity for compressed air supply, please refer to
section "Technical data".
Compressed air supply at the bar loading magazine at the front side to the left
(loading side).
Pressure accumulator
When the magazine has been transported as airfreight the pressure accumulator
fitted will be depressurised.
Before commissioning the pressure accumulator must be filled with nitrogen (N
by a specialist. Please stick to the recommended pressures.
For recommended pressures see the hydraulic diagram "Oil supply of the loading
magazine".
Media to be provided
Lubricating oil
For required lubricating oil sort and filling capacity, please refer to section "Techni-
cal data".
)
2
123
Advertisement
Table of Contents
