Table of Contents
Advertisement
TRANSPORT, INSTALLATION, COmmISSIONING
Safety Instructions
120
Safety Instructions
Instructions for shipment, installation, commissioning
Shipping brackets are identified by their red color.
Improper shipment, installation or commissioning often leads to accidents, dam-
age or malfunction of the magazine which INDEX will accept no liability for and
which will not be covered by the warranty.
Before the delivery, you should carefully plan the shipment to the installation site,
the unloading, the installation and the commissioning of the magazine. Please pay
attention to the following instructions in this document.
General sources of danger during in‑house transportation
Magazines may be shipped only by authorized and qualified personnel.
Act consciously during shipping. Please omit hazardous and risky actions. Consider
the consequences before acting.
Slopes and pitches can be particularly dangerous (e.g. ramps etc.). If passage is
unavoidable extra precautions must be taken.
Make sure that the load will not slide off and that vehicle's traction and brake force
are sufficient. Provide the load with additional securing devices, if necessary.
Dimensions and masses
For the mass of the bar loading magazine, please refer to the specifications in
chapter "Technical Data" of this document.
Shipping‑ and lifting equipment
For lifting and moving individual units use only lifting and moving equipment with
adequate load bearing capacity and loading area.
Bar loading magazine MBL22‑8, MBL24‑6, MBL32‑6, MBL40‑6, MBL40‑8
INDEX Multi spindle turning machines Control system C200-sl
DIM063EN - 2021-09-27
Advertisement
Table of Contents
