Cli Commands; Table C-37. Cli Commands - Nortel 2000 Software Reference Manual

Chapter 3 Using the CLI Commands

CLI Commands

Remote Annex Administrator's Guide for UNIX
Book C-122
If four consecutive squelches occur without an intervening known
command or if serial errors (framing/parity) occur while the line is
squelched, the Remote Annex shuts down the line for 20 seconds and
syslogs: excessive errors on port n; shutting down (where n is the port
number.)
Table C-37 lists both the user and superuser CLI commands.
To access the superuser CLI commands, issue the su command at the user
CLI prompt and enter the Remote Annex's administrative (su) password
(for more details on the superuser password, see su on page A-204). The
default superuser prompt is a # symbol instead of a colon:
annex: su
Password:
annex#

Table C-37. CLI Commands

Command Type
admin superuser
arap user
arp superuser
(continued on next page)
Description
Enters administrative mode.
Converts a CLI line into an ARAP connection.
Displays the Internet-to-hardware address
translation tables.
Book C