Table C-96. Parallel Printer Port Parameters - Nortel 2000 Software Reference Manual

Book C
Parameter
hardware_tabs
map_to_upper
printer_crlf
printer_width
tcp_keepalive
(parallel port)
type

Table C-96. Parallel Printer Port Parameters

Values Default
Y or N N
Y or N N
Y or N N
integer 0
1-254 (in 0
minutes) (255 (matchestcp
= disabled, _keepalive
0 = Annex
tcp_keepalive parameter
Annex) setting)
centronics or centronics
dataproducts
Remote Annex Administrator's Guide for UNIX
Chapter 5 Software Reference Guide
Description
Enables/disables use of hardware tab
stops.
Enables/disables printing in upper
case only.
Converts a carriage return to a carriage
return followed by a line feed before it
is sent to the printer.
Sets the maximum number of
characters per line.
Overrides the Annex tcp_keepalive
parameter for one or more specific
parallel ports.
Defines the printer interface.
Book C-317