Type_Of_Modem; User_Name; Vcli_Groups - Nortel 2000 Software Reference Manual

Chapter 2 Configuration Parameters Book C

type_of_modem

This asynchronous port parameter defines a 16-byte string that specifies
the modem type connected to the port. The modem type indexes a modem
description table that is loaded into the Annex at boot time. This string
must match the type_of_modem field in the modem section of the last
read configuration file; otherwise, the Annex logs a warning message.
The Annex also logs warnings when connecting to a port with an
unrecognized value in type_of_modem.
For more details on using the configuration file and modem management,
see Parsing the Configuration File on page A-345 and Creating modem
Entries in the Configuration File on page A-374.

user_name

This asynchronous port parameter defines an asynchronous port's user
name as a string. The CLI who command displays this value; the CLI
rlogin command passes this value to a host. The default is a null string
("").

vcli_groups

This Annex parameter specifies which LAT remote group code is
assigned to virtual CLI users. All virtual CLI users have the same group
code. Values are specified as a series of numbers separated by commas
(e.g., 1,5,7) or a range of numbers separated by a dash (e.g., 200-255).
Following the range, specify the keyword enable or disable. Allowable
values are all, none, or numbers between 0 and 255. Following the range,
specify the keyword enable or disable. The default is none enable.
Remote Annex Administrator's Guide for UNIX
Book C-118