Nortel 2000 Software Reference Manual page 148

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-130
Table C-39. Privileged Remote Annex VMS Commands (continued)
Command
define server
maintenance password
define server MOP host
define/set/change port
modem control
define port name
define/set/change
port noloss
define/set/change port
output flow control
define/set/change
port parity
define/set/change
port password
define port
session limit
define/set/change
port speed
define/set/change
port stop bits
(continued on next page)
Description
Defines or changes the user password required
for remote applications such as NCP and TSM.
Requires the physical Ethernet address for the
preferred VMS host.
Specifies whether or not the Remote Annex
manipulates modem signals.
Specifies the name of the port.
Specifies whether or not the port will store data
in its type ahead buffer while waiting for a
session connection to be made. If so, it will then
pass the data to the connection partner.
Specifies output flow control.
Specifies whether or not the port will provide a
parity bit with each character for error checking.
Specifies whether or not a user requires a
password to log in to the Remote Annex.
Limits the number of connected sessions on the
port.
Specifies the port speed in bits per second.
Tells the Remote Annex to use 1, 1.5, or 2 stop
bits when outputting a character.
Book C