Tn3270 - Nortel 2000 Software Reference Manual

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-214
Table C-70. Issuing Commands Using telnet (continued)
Command
options
?
? [command]

tn3270

The tn3270 command is a variation of telnet that allows you to log on to
an IBM host from an ASCII terminal attached to the Remote Annex. The
IBM host to which you connect can be running either the Virtual Machine/
Conversational Monitor System (VM/CMS) or the Multiple Virtual
Systems (MVS). While you are connected to an IBM host, your ASCII
terminal emulates an IBM 3278 (Model 2) full-screen terminal. This is
the only member of the IBM 3270 family of terminals that the Remote
Annex tn3270 supports. Table C-71 describes the arguments for tn3270.
The syntax is:
tn3270 [host [port]]
Description
Toggles displaying internal Telnet protocol
processing. The initial value is no display.
Displays help information on the toggle command.
Displays help information. Without arguments,
telnet prints a help summary. If you specify a
command, telnet prints help information for that
command.
Book C