Pref_Load_Addr; Pref_Mop_Host; Pref_Name1_Addr; Pref_Name2_Addr - Nortel 2000 Software Reference Manual

Book C Chapter 2 Configuration Parameters

pref_load_addr

This Annex parameter specifies the IP address for the preferred load host.
This is the host to which the Annex first requests a load of its operational
code. The default is 0.0.0.0.
Set this address to the boot host's IP address.

pref_mop_host

This Annex parameter specifies the Ethernet address of the preferred
MOP load or dump host. This address consists of six parts separated by
dashes. Each part contains a hexadecimal value. The default value is
00-00-00-00-00-00.

pref_name1_addr

This Annex parameter defines the IP address of the host specified in the
name_server_1 parameter. The default is 0.0.0.0.

pref_name2_addr

This Annex parameter specifies the IP address of the host specified in the
name_server_2 parameter or a back-up host that serves if
name_server_2 is set to none. The default is 0.0.0.0.
Remote Annex Administrator's Guide for UNIX
Book C-93