Syslog_Facility; Syslog_Host; Syslog_Mask - Nortel 2000 Software Reference Manual

Book C Chapter 2 Configuration Parameters

syslog_facility

This Annex parameter defines the local facility to which the UNIX
syslogd daemon sends Annex syslog messages. Valid options are
log_local0 through log_local7. The default is log_local7.
If the host to which messages are logged does not support 4.3BSD
logging, this parameter is ignored and messages are logged by priority
level (defined by syslog_mask).

syslog_host

This Annex parameter defines the IP address of the host that logs Annex
messages. The default, 0.0.0.0, causes the Annex to broadcast its log
messages.

syslog_mask

This Annex parameter defines the priority levels that the Annex logs. The
options are all, none, or a combination of levels separated by commas.
The default, none, disables logging. Table C-35 lists the levels in priority
order (see Event Logging Using syslog on page Book B-29 for more
details on using syslog for event logging).
Remote Annex Administrator's Guide for UNIX
Book C-107