Output_Start_Char; Output_Stop_Char; Output_Ttl; Parity - Nortel 2000 Software Reference Manual

Chapter 2 Configuration Parameters Book C
output _ start _ char
This asynchronous port parameter defines the control character sequence
that restarts output if output_flow_control is set to start/stop. The
default is .
CTRL-Q (^Q)
output _ stop _ char
This asynchronous port parameter defines the control character sequences
that stops output if the output_flow_control parameter is set to start/
stop. The default is .
CTRL-S (^S)

output_ttl

This Annex parameter sets the time-to-live (TTL) for packets the Annex
generates for RIP updates. TTL is a field in IP packets that limits their
lifetime on the network. Each time a packet crosses a router, the router
decrements the packet's TTL by 1. When the value reaches 0, the packet
is discarded. Allowable values range from 1 to 255. The default is 64.

parity

This asynchronous port parameter defines the type of parity that the
asynchronous port uses. The options are even, odd, or none. The default
is none.
Remote Annex Administrator's Guide for UNIX
Book C-84