Ipx; Jobs - Nortel 2000 Software Reference Manual

Chapter 3 Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-152

ipx

The ipx command configures a CLI port for IPX usage, while leaving the
port mode set to cli. This command allows IPX administrators to take
full advantage of security features such as SecurID and Enigma. When a
Fastlink II user in terminal mode logs into a Remote Annex CLI port, the
Remote Annex authenticates the user according to the value of the
cli_security parameter and the configuration of Remote Annex security
parameters.
Although ipx is a user level command, only the superuser help
command displays information about it.

jobs

The jobs command displays information for all current jobs (or sessions).
The syntax is:
jobs
The command displays the CLI command used to create the job. A plus
sign (+) displayed with the job indicates the most recently active job; a
minus sign (–) indicates the previously active:
annex: jobs
–1 telnet firsthost
+2 rlogin secondhost
3 telnet thirdhost
Book C