Chapter 3
Using the CLI Commands
Remote Annex Administrator's Guide for UNIX
Book C-150
Table C-46. Arguments for the hosts Command
Argument
Description
–q
Displays only the names of known hosts.
–n
Displays data from the Remote Annex's list of name server
hosts, rather than the list of all hosts, as well as the default
domain and domain search list contents.
-s
Displays the name and Internet address of the currently
connected security host.
host
Displays information for host. Specify host as a name or an
IP address.
IEN-116 name servers cannot do reverse address queries.
Specifying an IP address succeeds only if the address is in the
local host table.
Table C-47. Status Field Definitions
Field
Definition
--
The host does not broadcast status information.
up
The host broadcasted within the last several minutes.
down?
Six minutes have elapsed since the host's last broadcast.
down
More than 12 minutes have elapsed since the host's last
broadcast.
Book C