Mop_Password - Nortel 2000 Software Reference Manual

Book C
Table C-26. Valid Options for the mode Parameter (continued)
Option Description
rlogin Allows a port to communicate via the rlogin command.Use
this option in conjunction with the asynchronous port
parameter dedicated_arguments.
slave Allows port access through the port server. This mode
provides Annex login lines for hosts that have no Ethernet
interface and/or that require access to modems and serial line
printers attached to the Annex. It does not provide access to
the CLI.
slip Allows a port to perform as a network interface using SLIP. IP
packets are encapsulated by SLIP.
telnet Allows a port to communicate via the telnet command.Use
this option in conjunction with the asynchronous port
parameter dedicated_arguments.
tn3270 Allows a port to communicate via the tn3270 command. Use
this option in conjunction with the asynchronous port
parameter dedicated_arguments.
unused The port has no connection; the Annex ignores it.
You should mark a port as unused if it is not connected to
a device.

mop_password

This Annex parameter contains the MOP maintenance password. In this
8-byte password, each byte consists of two hexadecimal digits. The string
size ranges from 0 to 16 characters. For security reasons, the Annex
displays values as "<set>" or "<unset>." The default is "<unset>."
Remote Annex Administrator's Guide for UNIX
Chapter 2 Configuration Parameters
Book C-77