Book C
retrans_limit
This Annex parameter defines the number of times an Annex retransmits
a packet before notifying the LAT user about a network failure. Allowable
values range from 4 to 120. The default value is 8.
ring
This T1 parameter provides the audible ring to the central office for
incoming calls. When enabled, the audible ring is sent to the central office.
A Y enables this parameter, an N disables it. The default is Y. This
parameter is used with the wink_start and immediate_start protocols only.
rip_accept
This Interface parameter defines the networks for which the Annex
accepts advertised routes. Table C-28 lists the valid options; the default
is all.
Table C-28. Valid Options for the rip_accept Parameter
Option
Description
access_spec
Uses the form [include | exclude] network_list where
include means accept RIP updates only for the networks in
network_list, and exclude means accept all RIP updates
except for those in network_list. You can list up to eight
network IP addresses in network_list.
none
No RIP updates are accepted over the interface.
all
RIP updates for all networks are accepted.
Remote Annex Administrator's Guide for UNIX
Chapter 2
Configuration Parameters
Book C-97