Table C-66. Displaying Parameters Using Stty - Nortel 2000 Software Reference Manual

Book C

Table C-66. Displaying Parameters Using stty

Parameter
cliidletimer time
control_lines
argument
none
flow
modem
both
idletimer time
isize value
signal value
Remote Annex Administrator's Guide for UNIX
Chapter 3
Description
Displays the number of minutes for a no jobs timer in
which the CLI hangs up when the last CLI session
exits.
Displays the function of the hardware control lines.
The default is none. Possible values are:
The Remote Annex ignores the hardware control
lines.
Configures CTS and RTS for flow control, but does
not activate hardware flow control.
Configures DTR, DCD, and DSR for asynchronous
modem control (see need_dsr on page Book C-79).
Configures CTS, RTS, DTR, DCD, and DSR for
both flow control and modem control.
Displays the number of minutes in which the port
can be inactive before all sessions are terminated.
Displays the input buffer size in 240-byte blocks.
Displays the current state of the control lines
(specified in the control_lines parameter) in which a
plus (+) indicates the signal is asserted and a minus
(–) indicates the signal is not asserted.
Using the CLI Commands
Book C-203