Set - Nortel 2000 Software Reference Manual

Chapter 1 na Commands
Remote Annex Administrator's Guide for UNIX
Book C-24

set

The set command requires superuser privileges.
The set command modifies Annex configuration parameters:
set annex
set interface
set printer
set [port | asynchronous]
set t1
The syntax is:
set annex [=annex_list] annex_parameters
set interface [=interface_list] interface_parameters
set printer [=printer_list] printer_parameters
set [port | asynchronous] [=port_list] port_parameters
set t1 t1_parameters
The annex_parameters, interface_parameters, printer_parameters,
port_parameters, and t1_parameters arguments require a name and a
value separated by a space. A space is required between each parameter
argument. You can enter more than one parameter argument with each
command. If you are entering multiple parameter arguments that require
a new line, precede the new line with the ''\'' character. Changes made
to parameters take effect after booting or resetting the Annex or the
port(s).
Modifies Annex parameters.
Modifies interface parameters.
Modifies parallel printer port parameters.
Modifies asynchronous port parameters.
Modifies T1 parameters.
Book C