Replacing The Sca Scsi Drive Cage And Fused Power Cable - Nortel CallPilot User Manual

84 Chapter 8 Replacing basic chassis components

Replacing the SCA SCSI drive cage and fused power cable

Due to the potential of an over-current condition, Nortel provides a retrofit
SCSI power cable kit for the N0029330 power cable. The kit comprises an
improved SCSI power cable, product label, and retrofit procedure.
The cable kit part number for all locations, except EMEA, is FR029367. At
EMEA locations, use part number N0029367.
•
•
•
To replace the SCSI power cable
Step
1
2
Copyright © 2007, Nortel Networks
.
Only qualified field technicians who are familiar with CallPilot and RAID
should attempt this procedure.
A full-system backup and RAID drive consistency check must be
performed prior to replacing the SCSI power cable. These can both be
performed while the server is online.
If at any step in the procedure, the result is not as indicated, stop and
contact your next level of support for assistance before continuing.
Action
Log into the CallPilot server.
Launch the MegaRAID client to check the status of the RAID
sub-system:
a. Click Start → Programs → MegaRAID Client.
b. Open the Server Selection window.
c. Select Access Mode → Full Access and click OK.
Result: The MegaRAID Power Console Plus window appears.
MegaRAID Power Console Plus
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
Nortel Networks Confidential