To Replace The Scsi Power Cable; Replacing The Sca Scsi Drive Cage And Fused Power Cable - Nortel 1002rp Maintenance And Diagnostics

January 2007
Replacing the SCA SCSI drive cage and
fused power cable
Due to the potential of an over-current condition, Nortel provides a
retrofit SCSI power cable kit for the N0029330 power cable. The kit
comprises an improved SCSI power cable, product label, and retrofit
procedure.
The cable kit part number for all locations, except EMEA, is FR029367.
At EMEA locations, use part number N0029367.
Only qualified field technicians who are familiar with CallPilot and
RAID should attempt this procedure.
A full-system backup and RAID drive consistency check must be
performed prior to replacing the SCSI power cable. These can both
be performed while the server is online.
If at any step in the procedure, the result is not as indicated, stop and
contact your next level of support for assistance before continuing.

To replace the SCSI power cable

1 Log into the CallPilot server.
2 Launch the MegaRAID client to check the status of the RAID sub-
system:
a. Click Start
b. Select Access Mode
1002rp Server Maintenance and Diagnostics
➝
Programs
Client.
Result: The Server Selection window appears.
Result: The MegaRAID Power Console Plus window appears.
Replacing basic chassis components
➝
Power Console Plus
➝
Full Access and click OK.
➝
Launch
119