SBC card connectors and jumpers
"SBC card connectors and jumpers." (page 143)
connectors where cables must be disconnected or connected as part of the
procedure to replace the SBC card. The jumpers shown in this diagram are
used in the BIOS configuration procedures
SBC card connectors and jumpers.
To replace the SBC cardDANGER
Step
1
2
Copyright © 2007, Nortel Networks
.
Action
DANGER
Risk of explosion
The SBC has a lithium battery installed. If you are discarding the
SBC, dispose of used batteries according to the manufacturer's
instructions. Replacement of the battery with an incorrect type
also raises the risk of an explosion.
Power down the server.
Disconnect the power cord.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
Replacing the Pentium III SBC card 143
shows the location of
Nortel Networks Confidential