Using The Chkdsk Utility - Nortel CallPilot User Manual

34 Chapter 4 Using Windows online diagnostic tools
Step
1
2
3
4

Using the chkdsk utility

The chkdsk utility checks a specified disk on the server and displays a
status report. You can run the utility on drives C, D, E, or F. It is an online
utility, but it reduces system performance while it is running.
The chkdsk utility checks for errors at the Windows file system level. CallPilot
can be affected by errors at both the Windows and CallPilot file system
levels. The chkdsk utility will not detect CallPilot file system level errors.
Chkdsk utility syntax
The chkdsk utility uses the following syntax:
chkdsk [drive:][path]filename] [/F] [/V] [/R]
Chksdsk utility parameters
Chksdsk utility parameters
Parameter
drive:
filename
/F
Copyright © 2007, Nortel Networks
.
Action
Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
At the Command prompt, type netstat with the required
parameters.
Press Enter.
Result: The system runs the netstat utility.
Type Exit to exit the Command Prompt window and return to
Windows.
Note: A version of this utility, called autocheck, automatically runs
during Windows startup. Output from this utility appears on the blue
startup screen.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
—End—
Description
Drive letter of the drive that you want to check.
Names of files to check for fragmentation.
Optional parameter to fix errors on the disk.
Nortel Networks Confidential