Nortel CallPilot User Manual page 52

52 Chapter 6 Using CallPilot Manager to monitor hardware
When you click a component, the screen refreshes to show the details
about that component. Details are divided into the sections described
in the following table.
Component sections
Section
General
Maintenance
Diagnostics
Copyright © 2007, Nortel Networks
.
Description
This section shows general technical information about
the selected component. This typically includes the
following details:
•
the name, class, type, series, or version of a
component
• various capabilities of a component (for example,
whether a component is removable)
Note: This section does not appear for all components.
This section shows the state of the selected
component. Use this section to start and stop a
component before running a diagnostic test.
This section appears only for components on which you
are allowed to perform maintenance administration.
For more information about working with component
states, see the following sections:
• "Viewing component states" (page 53)
• "Starting and stopping components" (page 55)
Use the Diagnostics section to run one or more
diagnostic tests, or to view the results of the last
diagnostic tests that were run on the selected
component.
This section appears only for components on which
you are allowed to run diagnostics.
For more information about running diagnostics, see
the following sections:
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
Nortel Networks Confidential