Nortel CallPilot User Manual page 32

32 Chapter 4 Using Windows online diagnostic tools
The nbtstat command
The nbtstat command displays protocol statistics and current TCP/IP
connections using NBT.
Nbtstat command syntax
The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n]
[-R] [-r] [-S] [-s] [interval]
nbstat command parameters
nbstat command parameters
Parameter
-a remotename
-A IP address
-c
-n
-R
-r
-S
-s
interval
To run the nbtstat command from Windows
Copyright © 2007, Nortel Networks
.
Description
Lists the remote computer name table using its name.
Lists the remote computer name table using its IP
address.
Lists the contents of the NetBIOS name cache giving
the IP address of each name.
Lists local NetBIOS names. Registered indicates that
the name is registered by broadcast (Bnode) or WINS
(other node types).
Reloads the LMHOSTS file after purging all names
from the NetBIOS name cache.
Lists name resolution statistics for Windows networking
name resolution. On a Windows computer configured
to use WINS, this option returns the number of names
resolved and registered through broadcast or through
WINS.
Displays both client and server sessions, listing the
remote hosts by IP address only.
Displays both client and server sessions and attempts
to convert the remote host IP address to a name using
the HOSTS file.
Displays selected statistics, pausing interval seconds
between each display. Press Ctrl+C to stop displaying
statistics. Without this parameter, nbtstat prints the
current configuration information once.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
—End—
Nortel Networks Confidential