Nortel CallPilot User Manual page 44

44 Chapter 5 Using serial port diagnostic tools
Service Control Start command
Use the Service Control Start command to restart a specified service on a
serial port. The syntax for the Service Control Start command is as follows:
sc <service name>
To invoke the Service Control Start command from Windows
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Action
Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
At the Command prompt, type sc start "service_name", and
then press Enter.
For example, type sc start "Remote Access Server", and
then press Enter.
Note: The quotation marks are required, as in the example
above.
Type Exit, and then press Enter to exit the Command Prompt
window.
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
—End—
—End—
Nortel Networks Confidential